News

Fan air volume: 45032~·55219CMH

Wind pressure of fan: 5342~4229 Pa

Balance grade: ≤G2.5 mm/s

Operating temperature: ≤80℃

Fan efficiency: 84%

Fan speed: 1100rpm

Motor power: 110 KW

Duct diameter: DN800~DN1000 mm (customizable)

Structural composition

Impeller: It is composed of FRP blades and wheel hub, and the shape and angle of the blades are carefully designed to ensure efficient airflow transportation.

Chassis: Made of glass fiber reinforced plastic, it has the characteristics of corrosion resistance and light weight, and can protect internal components and steering flow.

Air inlet: used to guide air into the fan, usually designed in a convergent shape to improve air intake efficiency.

Transmission group: including motor, pulley, bearing and other parts, used to drive the impeller to rotate and realize air transportation.

Performance characteristics

Strong corrosion resistance: FRP material has good corrosion resistance, can resist the corrosion of corrosive gases such as acid, alkali and salt, and is suitable for corrosive environments such as chemical industry, electroplating and sewage treatment.

Light weight: Compared with the fan made of metal, the FRP centrifugal fan is light in weight, easy to install and transport, and has lower requirements on the bearing capacity of the foundation.

High efficiency: The optimized impeller design and reasonable airflow channel make the fan have high operating efficiency, which can effectively transport air and reduce energy consumption.

Low noise: In the process of design and manufacture, various noise reduction measures have been taken, such as optimizing the impeller shape and adopting damping devices, so that the noise generated by the fan during operation is low, and it is suitable for places with high noise requirements

Chemical industry: It is used for ventilation in chemical production process, eliminating corrosive gases and ensuring the safety of production environment and air quality.

Electroplating industry: the electroplating workshop will produce corrosive gases such as acid mist, and the fan can exhaust these harmful gases in time to reduce the harm to equipment and personnel.

Sewage treatment: In the aeration tank and sedimentation tank of sewage treatment plant, it is used for ventilation, providing oxygen, promoting the growth and metabolism of microorganisms and improving the efficiency of sewage treatment.

Metallurgical industry: used for ventilation and dust removal in metallurgical workshops, reducing dust concentration in workshops and improving working environment.

technica

Air volume range: usually hundreds to tens of thousands of cubic meters per hour, depending on the model and specification of the fan.

Wind pressure range: from several hundred pa to several thousand pa, which can meet the ventilation needs of different places.

Rotational speed: According to the different motor power and transmission mode, the rotational speed varies, generally from several hundred to several thousand revolutions per minute.

Power: ranging from several kilowatts to tens of kilowatts, determined according to factors such as air volume, wind pressure and efficiency of the fan.